Can you help me ? I would like control model on keyboard only.
Is it realy?
Sorry for my English I'm from Czech Republic and mz English is verz bad!!
Thanks
Can I control model on keyboard only ??
8 posts
• Page 1 of 1
by trvo » Wed Apr 23, 2003 3:00 pm
Hi,
Yes you can. To do it:
Click Controls Menu
Click Keyboard
Tell it what keys you want to do what
Click OK
Done
Hope that it helps
Trvo
Yes you can. To do it:
Click Controls Menu
Click Keyboard
Tell it what keys you want to do what
Click OK
Done
Hope that it helps
Trvo
Please Note: No trees were destroyed in the sending of this contaminant free message. We do however concede that a significant number of electrons may have been inconvenienced. Visit My Website at: http://www.freewebs.com/fmsusers/
-
trvo - Posts: 116
- Joined: Mon Mar 10, 2003 9:20 pm
- Location: Earth
by iivuch » Wed Apr 23, 2003 3:12 pm
Hi,
Again the topic is Keyboard. I know keyboard is not the same as a real radio transmitter, but at least until I buy a real one, could some one give me idea what could be a good keyboard configuration to be as close as possible to Mode1 and respectively Mode2 transmitter.
This questions shows that I am a novice in RC and am not very clear how exactly are the movements in the two modes. Please help.
Ivan
Again the topic is Keyboard. I know keyboard is not the same as a real radio transmitter, but at least until I buy a real one, could some one give me idea what could be a good keyboard configuration to be as close as possible to Mode1 and respectively Mode2 transmitter.
This questions shows that I am a novice in RC and am not very clear how exactly are the movements in the two modes. Please help.
Ivan
- iivuch
- Posts: 2
- Joined: Wed Apr 23, 2003 3:08 pm
by Steve Lewin » Wed Apr 23, 2003 4:09 pm
The keyboard really isn't anything like a transmitter. It won't help much with learning to fly. Even a joystick would be much better
About all you can do is put the controls on the correct "hand". The default keyboard layout is something like Mode 2 with throttle and rudder on the left of the k/bd and elevator and aileron on the right. For Mode 1 swap the throttle keys for the elevator keys.
Steve
About all you can do is put the controls on the correct "hand". The default keyboard layout is something like Mode 2 with throttle and rudder on the left of the k/bd and elevator and aileron on the right. For Mode 1 swap the throttle keys for the elevator keys.
Steve
- Steve Lewin
- Posts: 816
- Joined: Mon Jun 18, 2001 2:32 pm
- Location: N. Staffs, UK
by iivuch » Thu Apr 24, 2003 12:30 pm
Thanks Steve,
Which one is more common these days - Mode1 or Mode2? Question goes for UK (South)
Yes, I realise that keyboard is nothing like a transmitter, but at least while I am waiting to buy one, I could put some habits into my hands with the keyboard.
Thanks again
Ivan
Which one is more common these days - Mode1 or Mode2? Question goes for UK (South)
Yes, I realise that keyboard is nothing like a transmitter, but at least while I am waiting to buy one, I could put some habits into my hands with the keyboard.
Thanks again
Ivan
- iivuch
- Posts: 2
- Joined: Wed Apr 23, 2003 3:08 pm
by Steve Lewin » Thu Apr 24, 2003 2:10 pm
Almost everyone I know here in the South flies on Mode 2. Mode 1 seems to be somewhat more common north of Birmingham. No idea why.
Good luck - Steve
Good luck - Steve
- Steve Lewin
- Posts: 816
- Joined: Mon Jun 18, 2001 2:32 pm
- Location: N. Staffs, UK
by arnolde » Mon Nov 14, 2005 8:02 pm
I just tried using the keyboard on my notebook, just to try out the program (adapter cable is on order), but a) the number pad keys do not work right, even though I can set my notebook to "num pad mode" where the keys 7,8,9,0,u,i,o,p,j,k,l,ö, etc... should generate numpad signals, but 8 seems to zoom out, 9 seems to rotate, etc...
b) now that wouldnt be so bad if i could change the keyboard definition. When i click on a function in the keyboard menu, the old definition disappears, but how do I get a new definition in? I'd expect pressing the desired key next would do it
but nothing happens.
I am using the Alpha 8.5 Version, maybe it's a new bug in it, and it works in the Betas?
Ethan
b) now that wouldnt be so bad if i could change the keyboard definition. When i click on a function in the keyboard menu, the old definition disappears, but how do I get a new definition in? I'd expect pressing the desired key next would do it
but nothing happens.
I am using the Alpha 8.5 Version, maybe it's a new bug in it, and it works in the Betas?
Ethan
- arnolde
- Posts: 3
- Joined: Mon Nov 14, 2005 6:26 pm
8 posts
• Page 1 of 1
Who is online
Users browsing this forum: No registered users and 113 guests