Thanks for your reply sorry it took a while to get back have been away.
The FMS I am using is 2.0 Alpha 8.3. Transmitter I am using is 4 Channel 0404. using windows XP not sure how to calibrate the two help is needed Im afraid to say.
Hope you can help mate, John
using simulator for RC Heli. Callibrating 4 Channel Transmit
8 posts
• Page 1 of 1
using simulator for RC Heli. Callibrating 4 Channel Transmit
by tromjay » Sun Dec 30, 2007 9:22 am
- tromjay
- Posts: 2
- Joined: Sun Dec 30, 2007 9:14 am
- Location: Darlington
by Steve Lewin » Sun Dec 30, 2007 2:30 pm
- Steve Lewin
- Posts: 816
- Joined: Mon Jun 18, 2001 2:32 pm
- Location: N. Staffs, UK
reply to your message
by tromjay » Sat Jan 05, 2008 2:00 pm
- tromjay
- Posts: 2
- Joined: Sun Dec 30, 2007 9:14 am
- Location: Darlington
Re: reply to your message
by mmcneill » Fri Feb 08, 2008 3:53 am
- mmcneill
- Posts: 1
- Joined: Fri Feb 08, 2008 3:50 am
Controller set-up
by Zimatosa » Wed Feb 13, 2008 8:27 am
...and. In the game you have to go to the control tab, choose the correct controller(joystick) then hit the mapping/calibration button. Move all of your sticks and switches to see if it is moving the bars under "channels". If it is moving the bars, hit calibrate first. Go through all steps...When you are finished, you need to put the numbers in the left column that correspond to the channel you wan to control that function. From the top on the left, mine reads...42134213...the top 4 are for airplanes, bottom 4 are for heli's. I am running a 6 channel dynam USB though and have more functions...Good luck!
- Zimatosa
- Posts: 3
- Joined: Wed Feb 06, 2008 7:22 pm
exceeed problem fix
by dancingeagle » Sat Mar 15, 2008 1:54 pm
- dancingeagle
- Posts: 4
- Joined: Fri Mar 14, 2008 7:52 pm
8 posts
• Page 1 of 1
Who is online
Users browsing this forum: No registered users and 96 guests