Instructions for use of SIMtransmitter

Instructions for use of SIMtransmitter

Postby Adrian Lever » Mon Nov 05, 2007 1:26 pm

I am computer illiterate so information sent to me from Mfg of SIM transmitter is uninteligible . All I want to know is what controls to use for flying the simulated helicopter so I can go out and buy a model . can anybody out there help me ? Kind regards Adrian
Adrian Lever
 
Posts: 2
Joined: Mon Nov 05, 2007 12:25 pm

Postby Steve Lewin » Mon Nov 05, 2007 1:48 pm

It might sort of depend what sort of "SIMtransmitter" you have and what sim program you're intending to use it with. There are loads of them and they're not all the same.

Steve
Steve Lewin
 
Posts: 816
Joined: Mon Jun 18, 2001 2:32 pm
Location: N. Staffs, UK

SIM transmitter

Postby Adrian Lever » Mon Nov 05, 2007 5:37 pm

Dear Stev thanks for your info there is no model number on the transmitter . I can only give you the following info .

Left hand control : Stick forward turns plane left , Stick backwards turns it right . Lateral movement right slows engine revs ,lateral movement left speeds it up .

Right hand control forward elevator down , backwards elevator up.Etc.,

Regards Adrian .
Adrian Lever
 
Posts: 2
Joined: Mon Nov 05, 2007 12:25 pm

Postby Steve Lewin » Mon Nov 05, 2007 10:18 pm

Well you didn't actually mention that you have it all working but just with the controls on the wrong sticks.

Use the mapping/calibration screen. Calibrate first following the instructions. Then put the number of the bar that moves with the control you WANT for throttle against the marking "Throttle" on the LH side. Repeat for the other plane controls. Then copy those 4 numbers into the bottom 4 boxes which are the ones which control the helicopters.

Steve
Steve Lewin
 
Posts: 816
Joined: Mon Jun 18, 2001 2:32 pm
Location: N. Staffs, UK


Return to General Discussions

Who is online

Users browsing this forum: No registered users and 4 guests