Set up simulator mapping help

[rcmurray]

Hello all,,
I just into this RC helo, and like it very much, alread crack up my chopper got it fix and got the EK2-0905 Simulator training kit.
Here is my problem.

My real transmiter has the follow controls:
Starting with the LEFT joystick push the joystick up for full throttle, pull it down for no throttle.
again with the LEFT joystick, move it left to go up and right to come down.
now for the RIGHT joystick up to go forward, down to go back ward.
move the right joystick to the left spinns clock wise, to the right it spins counter clock wise.

Please I need my simulator controls to do the same as my real transmiter does, can some one please help me to set up my mapping so my simulator control is the same as my real controler,, help please !!! to avoid another crash !!!!! please feel free to e-mail me also rc.murray@juno.com
RC

[Steve Lewin]

That's what the mapping/calibration screen is for. Experiment a bit. Watch which channel bar on RH side moves for each stick movement then just put the correct channel number in the appropriate box on LH side of the screen. If one moves the wrong way tick the INV box against it.

Note it's the bottom 4 boxes that control the helis. The top 4 are just for planes.

Steve

[rcmurray]

[phildc]

[Steve Lewin]