Beta 7 is out! - Thanks, guys!

[bsergeev]

TX interface is so much smoother!

[ButtonFly]

I can't get 7.0 to work with any of the helis and my TX? All the planes work, but neither of the helis. Any ideas? They don't respond to any control inputs. My TX shows in both the 16 and 32 bit cal routines, and works fine in the 16 bit. I am using a parallel interface. Thanks.

[joboo101]

I'm using a joy stick interface and have the same problem. Help?

[WreckRman2]

Try matching these settings in the mapping area for your joystick or TX and the helicopters will fly...

Rudder same as Tail = 4
Elevator same as Nick = 2
Aileron same as Roll = 1
Throttle same as pitch = 3

[joboo101]

I did that before even trying to fly. All the controls seem to be working properly in the calibration window, none have any effect on helicopters.

[WreckRman2]

Go to and look at the image in that post. You will see what I mean by matching the settings and this will enable helicopters to fly with your TX or joystick.

[joboo101]

Thanks. Got it now.