A few questions

[elgecko]

First off this seems to be a very nice R/C Sim.

Is there a way to change the speed and altitude to MPH and Feet? I might have overlooked this.

The plane that I have been playing with in the sim is the T-Hawk. I'm getting close to deciding to purchase this plane.
I was wondering what are the best settings to get this plane to fly as close as possible to the real plane?
I ask because the plane is a 3 channel plane using throttle, rudder, and elevator. If I select those options in the mapping, the plane does not turn. If I skip the rudder and select the aileron, it turns. The plane flying model might be set up to fly realistically using the ailerons to turn because it make the back of the plane "fish tail" which is what I would expect using the rudder for turning.

So this is my mapping for the T-Hawk:

Rudder: 0
Elevator: 4
aileron: 3
Throttle: 2
Tail: 0
Nick: 0
Roll: 0
Pitch: 0

Would I want to include the Tail, Nick, Roll, or Pitch to make it fly more realistic?

The Inv and Exp and not checked. To be honest, I'm not sure what the Exp stands for.

[ggunners]

Yeah, the rudder is mapped to the aileron channel for 3-channel transmitters. If you want the rudder on the other stick, change the channel for the rudder from 3 to 1.

-- ggunners